Toyota MR2 Antenna Parts
For:  Spyder, Models of the Following Years
     2000-2005

Antenna Mast *


Click Photo for + size
 

( 1 ) ... MR2 Power Antenna Mast

   This is a "BRAND NEW" OEM  ( Original Equipment Manufacturer not aftermarket ) HIGH QUALITY Toyota MR2 POWER ANTENNA REPLACEMENT MAST, for your Factory MR2 Power Antenna....  This mast is 100% identical to the mast you will purchase at a Toyota Dealer, no universal fitting mast here.   

    This is the Part that is needed If your MR2 Power Antenna MOTOR RUNS, ... or makes a clicking, grinding sound .... BUT the Mast doesn't go up or down, "OR" your Mast is "BENT" from the Car Wash or Vandalism..... This PART will Repair your MR2 Power Antenna back to a ""WORKING POWER ANTENNA"" ... This is Really a very simple part for YOU yourself to Install,...   

   * See the Special note Below.

Fits the following Toyota MR2 Models:
With Factory Power Antenna
 

1. How do I know that I need JUST a NEW Mast ???
2. How to Remove the outside Nut ?
3. How to Replace the Mast ?
 

$39.50

Free Shipping in the USA ***

15" Antenna Mast *



Click Photo for + Size

The Mast above is Actual other than it will come with a specific connector for this vehicle.
 

( 5 ) ... MR2  15 " Fixed Antenna Mast
2000-2005

 　 This is a "BRAND NEW" VERY HIGH END Custom Tapered 15 " AM / FM Antenna Mast.　Our 15 " Mast is Made of Spring Stainless and is Available in either a ALL Black or All Brushed Stainless Colored Masts.　What is unique with our 15 " mast is it is made of Spring Stainless Steel, what that means is that when you bend it, it WILL Spring Back to its Original Position.　What is also unique is our stainless rod is Tapered, meaning at the base where it screws onto your vehicle, the rod is wider and tapers to a smaller rod size at the tip, talk about a old time modern Custom Look with a 15 " mast.　So if you are looking for a mast that has that Custom LOOK and want that Old Time High End Spring Tapered Rod Quality, this 15 " Mast is that MAST.

     After years of testing this mast we have found that the AM/FM reception is 95% as good as the factory 32" mast that your vehicle was made with.

     So if you are looking for that Custom LOOK and want that Old Time High End Made in USA Quality, this is the Mast for you.

*  Made of Spring Stainless. WILL NOT Stay Bent, Like Others.
*  The 15" Rod is also Tapered for that Custom Look, Just like the Older Style Masts Found on Older Vehicles.
*  Available in an All Black, OR, All Stainless in Color Mast, Your Choice.
*  This 15" Mast has Been Optimally Tuned for Superb AM/FM Reception.
*  Simply Unscrew your Old Mast off and Screw this New Mast back on, Plug and Play Fitment.

Note: .. THIS MAST HERE IS MADE SPECIFICALLY FOR THE VEHICLE LISTED BELOW,
THIS IS NOT A ONE SIZE FIT ALL MAST.
 

ALL BLACK ANODIZED
Version

$20.50

Free Shipping in the USA ***

ALL STAINLESS
Version

$18.99

Free Shipping in the USA ***

31" Antenna Mast *



Click Photo for + Size

The Mast above is Actual other than it will come with a specific connector for this vehicle.
 

( 5 ) ... MR2  31 " Fixed Antenna Mast
2000-2005

 　 This is a "BRAND NEW" High Quality 31" Stainless Mast.  This is what is found on these vehicles when made new from the factory.  This mast is specific for this vehicle and will be as simple as unscrewing the old mast and installing this new one.  It is available in either a ALL BLACK or ALL BRUSHED STAINLESS Mast.

*  Available in an All Black, OR, All Stainless in Color Mast, Your Choice.
*  This 31" Mast has Been Optimally Tuned for Superb AM/FM Reception.
*  Simply Unscrew your Old Mast off and Screw this New Mast back on, Plug and Play Fitment.

Note: .. THIS MAST HERE IS MADE SPECIFICALLY FOR THE VEHICLE LISTED BELOW,
THIS IS NOT A ONE SIZE FIT ALL MAST.

ALL BLACK ANODIZED
Version

$21.99

Free Shipping in the USA ***

ALL STAINLESS
Version

$21.99

Free Shipping in the USA ***

Power Works  **
Power Antenna Kit


Click Photo for + Size

( 4 ) ... MR2 Power Antenna

    No Aftermarket Power unit Available for this Model MR2.  As the body angle is too steep, for mounting purposes. This Power Kit is currently under development.